Allegro MicroSystems, LLC
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
ACS758ECB-200U-PFF-T
विस्तार से देखें DataSheets

ACS758ECB-200U-PFF-T

Product Overview

Category

The ACS758ECB-200U-PFF-T belongs to the category of current sensor integrated circuits.

Use

It is used for measuring electrical current in various applications.

Characteristics

  • High accuracy
  • Low noise
  • Small package size
  • Wide dynamic range

Package

The ACS758ECB-200U-PFF-T is available in a surface-mount package.

Essence

This product is essential for precise current measurement in electronic systems.

Packaging/Quantity

The ACS758ECB-200U-PFF-T is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Operating Voltage: 3V to 5.5V
  • Output Voltage: 0.6V to VCC - 0.4V
  • Sensitivity: 20mV/A
  • Bandwidth: DC to 120kHz
  • Operating Temperature Range: -40°C to 150°C

Detailed Pin Configuration

The ACS758ECB-200U-PFF-T has a 5-pin configuration: 1. VCC 2. GND 3. VIOUT 4. NC (No Connection) 5. VOUT

Functional Features

  • High sensitivity
  • Low offset voltage
  • Overcurrent detection
  • Integrated overcurrent fault output

Advantages

  • Accurate current measurement
  • Wide operating temperature range
  • Compact design
  • Integrated fault detection

Disadvantages

  • Limited bandwidth for high-frequency applications
  • Requires careful PCB layout for optimal performance

Working Principles

The ACS758ECB-200U-PFF-T utilizes the Hall effect to measure current. When current flows through the device, it generates a magnetic field that is sensed by the integrated Hall sensor, producing an output voltage proportional to the input current.

Detailed Application Field Plans

The ACS758ECB-200U-PFF-T is suitable for a wide range of applications including: - Motor control systems - Power supplies - Battery management systems - Industrial automation - Inverters and converters

Detailed and Complete Alternative Models

  • ACS758KCB-150B-PSS-T
  • ACS759KCB-150B-PSS-T
  • ACS770ECB-200B-PFF-T
  • ACS771KCB-150B-PSS-T

In conclusion, the ACS758ECB-200U-PFF-T is a highly accurate and reliable current sensor IC with a wide range of applications in various electronic systems.

[Word count: 330]

तकनीकी समाधानों में ACS758ECB-200U-PFF-T के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T is a fully integrated Hall effect-based linear current sensor designed for applications that require high precision and low noise.

  2. What is the operating voltage range of the ACS758ECB-200U-PFF-T?

    • The operating voltage range of the ACS758ECB-200U-PFF-T is 3V to 5.5V, making it suitable for a wide range of applications.

  3. What is the output signal of the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T provides an analog output voltage proportional to the AC or DC current passing through the device.

  4. What is the typical accuracy of the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T has a typical accuracy of ±1.5% at room temperature, providing reliable current measurements.

  5. What is the bandwidth of the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T has a bandwidth of 120 kHz, allowing for precise current sensing in dynamic applications.

  6. What are the common applications of the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T is commonly used in motor control, power management systems, and industrial automation for accurate current monitoring.

  7. Does the ACS758ECB-200U-PFF-T require external calibration?

    • No, the ACS758ECB-200U-PFF-T is factory-calibrated, eliminating the need for additional calibration during application.

  8. Is the ACS758ECB-200U-PFF-T suitable for high-current applications?

    • Yes, the ACS758ECB-200U-PFF-T can measure currents up to 200A, making it suitable for high-current applications.

  9. What is the thermal performance of the ACS758ECB-200U-PFF-T?

    • The ACS758ECB-200U-PFF-T has a low thermal drift, ensuring stable performance across a wide temperature range.

  10. Can the ACS758ECB-200U-PFF-T be used in automotive applications?

    • Yes, the ACS758ECB-200U-PFF-T is AEC-Q100 qualified, making it suitable for automotive applications where high reliability is essential.