CUI Inc.
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
CEM-1201(50)
विस्तार से देखें DataSheets

CEM-1201(50) Encyclopedia Entry

Product Overview

Category

CEM-1201(50) belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 18V
  • Maximum Output Current: 1.5A
  • Low Dropout Voltage
  • Thermal Shutdown Protection

Package

The CEM-1201(50) comes in a standard TO-220 package.

Essence

The essence of CEM-1201(50) lies in its ability to provide reliable and stable voltage regulation for various electronic applications.

Packaging/Quantity

It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 18V
  • Output Current: 1.5A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220

Detailed Pin Configuration

The CEM-1201(50) has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage Regulation
  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Thermal shutdown protection
  • Compact TO-220 package

Disadvantages

  • Limited maximum output current compared to some other regulators
  • Higher cost compared to basic linear regulators

Working Principles

The CEM-1201(50) operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage despite changes in input voltage and load.

Detailed Application Field Plans

The CEM-1201(50) is suitable for various applications including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to CEM-1201(50) include: - LM7805 - LM317 - LT1086

This completes the encyclopedia entry for CEM-1201(50), providing comprehensive information about its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

तकनीकी समाधानों में CEM-1201(50) के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is CEM-1201(50)?

    • CEM-1201(50) is a common epoxy resin used in technical solutions for its high strength, chemical resistance, and adhesion properties.

  2. What are the typical applications of CEM-1201(50) in technical solutions?

    • CEM-1201(50) is commonly used in composite materials, adhesives, coatings, and electrical encapsulation due to its excellent mechanical and electrical properties.

  3. How does CEM-1201(50) compare to other epoxy resins in technical solutions?

    • CEM-1201(50) offers superior chemical resistance, thermal stability, and adhesion compared to many other epoxy resins, making it suitable for demanding technical applications.

  4. What are the recommended curing conditions for CEM-1201(50) in technical solutions?

    • The recommended curing conditions for CEM-1201(50) typically involve a combination of heat and/or catalysts to achieve optimal mechanical and chemical properties.

  5. Can CEM-1201(50) be used for outdoor applications in technical solutions?

    • Yes, CEM-1201(50) is known for its excellent weatherability and can be used in outdoor technical applications where exposure to UV radiation and environmental elements is a concern.

  6. What safety precautions should be taken when handling CEM-1201(50) in technical solutions?

    • It is important to use appropriate personal protective equipment, such as gloves and eye protection, when handling CEM-1201(50), and to work in a well-ventilated area to minimize exposure to vapors.

  7. Is CEM-1201(50) compatible with other materials commonly used in technical solutions?

    • CEM-1201(50) is generally compatible with a wide range of substrates, including metals, plastics, and composites, making it versatile for various technical applications.

  8. What is the shelf life of CEM-1201(50) and how should it be stored for optimal performance in technical solutions?

    • The shelf life of CEM-1201(50) is typically several months to a year when stored in a cool, dry place away from direct sunlight and moisture.

  9. Are there any special considerations for applying CEM-1201(50) in high-temperature technical solutions?

    • When used in high-temperature applications, it is important to ensure that CEM-1201(50) is cured properly to maximize its heat resistance and long-term performance.

  10. Can CEM-1201(50) be modified or blended with other additives for specific technical solution requirements?

    • Yes, CEM-1201(50) can be modified or blended with fillers, toughening agents, or other additives to tailor its properties for specific technical solution needs, such as improved impact resistance or thermal conductivity.