Diodes Incorporated
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
AZ23C10-7
विस्तार से देखें DataSheets

AZ23C10-7

Product Overview

Category: Diode
Use: Rectification, voltage regulation
Characteristics: Small signal, high-speed switching
Package: SOT-23
Essence: Silicon diode
Packaging/Quantity: Tape & Reel, 3000 units

Specifications

  • Part Number: AZ23C10-7
  • Type: Zener diode
  • Voltage - Zener (Nom): 10V
  • Power Dissipation (Max): 250mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA @ 7V
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The AZ23C10-7 is a three-pin device with the following pin configuration: 1. Anode (A) 2. Cathode (K) 3. No Connection (NC)

Functional Features

  • Precise voltage regulation
  • High reliability and stability
  • Fast response time

Advantages and Disadvantages

Advantages: - Small form factor - Low reverse leakage current - Wide operating temperature range

Disadvantages: - Limited power dissipation capability - Sensitivity to overvoltage conditions

Working Principles

The AZ23C10-7 operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when operated in the reverse breakdown region.

Detailed Application Field Plans

The AZ23C10-7 is commonly used in various applications such as: - Voltage regulation in power supplies - Signal clamping and protection circuits - Precision voltage references

Detailed and Complete Alternative Models

Some alternative models to the AZ23C10-7 include: - BZX84C10 - 1N4740A - MMBZ5242B

This completes the entry for AZ23C10-7, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

तकनीकी समाधानों में AZ23C10-7 के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is AZ23C10-7?

    • AZ23C10-7 is a dual surface mount Zener diode with a voltage range of 9.1V to 10.5V.

  2. What are the typical applications of AZ23C10-7?

    • AZ23C10-7 is commonly used for voltage regulation, surge suppression, and transient voltage protection in various electronic circuits.

  3. What is the maximum power dissipation of AZ23C10-7?

    • The maximum power dissipation of AZ23C10-7 is 200mW.

  4. What is the operating temperature range of AZ23C10-7?

    • AZ23C10-7 can operate within a temperature range of -65°C to +150°C.

  5. What is the forward voltage drop of AZ23C10-7?

    • The forward voltage drop of AZ23C10-7 is typically around 0.9V at a forward current of 10mA.

  6. Can AZ23C10-7 be used for overvoltage protection?

    • Yes, AZ23C10-7 can be used to protect sensitive components from overvoltage conditions by shunting excess voltage to ground.

  7. Is AZ23C10-7 suitable for low-power applications?

    • Yes, AZ23C10-7's low power dissipation makes it suitable for low-power applications where precise voltage regulation is required.

  8. What is the reverse leakage current of AZ23C10-7?

    • The reverse leakage current of AZ23C10-7 is typically very low, ensuring minimal impact on the overall circuit performance.

  9. Can AZ23C10-7 be used in automotive electronics?

    • Yes, AZ23C10-7 is often used in automotive electronics for voltage clamping and transient protection.

  10. Are there any specific layout considerations when using AZ23C10-7 in a PCB design?

    • It is important to place AZ23C10-7 close to the protected circuitry and ensure proper thermal management to maintain its reliability and performance.