Eaton
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
R25030-1SR
विस्तार से देखें DataSheets

R25030-1SR

Product Overview

Category: Integrated Circuit
Use: Signal Amplification
Characteristics: High gain, low noise
Package: SOP-8
Essence: Amplifier IC
Packaging/Quantity: Tape & Reel, 2500 units

Specifications

  • Supply Voltage: 3V to 18V
  • Gain Bandwidth Product: 10MHz
  • Input Bias Current: 1nA
  • Output Current: 20mA
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  1. V+
  2. Inverting Input (-)
  3. Non-Inverting Input (+)
  4. V-
  5. Output
  6. NC (No Connection)
  7. Ground
  8. Vcc

Functional Features

  • High voltage gain
  • Low input bias current
  • Wide supply voltage range
  • Small signal amplification

Advantages and Disadvantages

Advantages: - Versatile application - Low noise - Wide operating temperature range

Disadvantages: - Limited output current - Sensitive to external interference

Working Principles

The R25030-1SR is designed to amplify small electrical signals without introducing significant noise or distortion. It operates by applying a differential input voltage to the non-inverting and inverting inputs, resulting in an amplified output signal.

Detailed Application Field Plans

  1. Medical Devices: Used in ECG amplifiers and patient monitoring systems.
  2. Audio Systems: Employed in preamplifiers for high-fidelity audio equipment.
  3. Instrumentation: Integrated into precision measurement instruments for signal conditioning.

Detailed and Complete Alternative Models

  1. LM358
  2. AD620
  3. INA128

This concludes the entry for R25030-1SR, covering its product details, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word count: 259

तकनीकी समाधानों में R25030-1SR के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is R25030-1SR?

    • R25030-1SR is a specific type of resistor commonly used in electronic circuits to limit current flow.

  2. What are the typical applications of R25030-1SR?

    • R25030-1SR is often used in power supplies, motor control circuits, and other applications where precise current limiting is required.

  3. What is the power rating of R25030-1SR?

    • The power rating of R25030-1SR is typically 1 watt, making it suitable for a wide range of applications.

  4. What is the resistance value of R25030-1SR?

    • The resistance value of R25030-1SR is 30 ohms, which is ideal for many current-limiting applications.

  5. Can R25030-1SR be used in high-temperature environments?

    • Yes, R25030-1SR is designed to operate in high-temperature environments, making it suitable for industrial and automotive applications.

  6. Is R25030-1SR suitable for use in precision instrumentation?

    • While R25030-1SR can be used in some precision applications, its primary purpose is current limiting rather than precision measurement.

  7. What are the voltage limitations of R25030-1SR?

    • R25030-1SR is typically rated for voltages up to 250V, making it suitable for many low to medium voltage applications.

  8. Can R25030-1SR be used in AC and DC circuits?

    • Yes, R25030-1SR can be used in both AC and DC circuits, providing flexibility in various technical solutions.

  9. Are there any special considerations for mounting R25030-1SR on a circuit board?

    • It's important to ensure proper heat dissipation and avoid excessive temperature buildup when mounting R25030-1SR on a circuit board.

  10. Where can I purchase R25030-1SR resistors?

    • R25030-1SR resistors can be purchased from electronic component distributors, online retailers, and directly from manufacturers.