Eaton
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
R25100-2COR
विस्तार से देखें DataSheets

R25100-2COR Product Overview

Introduction

The R25100-2COR is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Information Overview

  • Category: Electronic Component
  • Use: The R25100-2COR is used in electronic circuits for voltage regulation and power management.
  • Characteristics: It is known for its high efficiency, low dropout voltage, and precise output voltage regulation.
  • Package: The product is available in a compact and durable package suitable for surface mount applications.
  • Essence: The essence of the R25100-2COR lies in its ability to provide stable and reliable voltage regulation in various electronic devices.
  • Packaging/Quantity: The product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 26V
  • Output Voltage Range: 0.8V to 20V
  • Output Current: Up to 1A
  • Dropout Voltage: 300mV at 1A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The R25100-2COR features a standard 5-pin SOT-23 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)

Functional Features

  • Voltage Regulation: The device provides precise output voltage regulation, ensuring stable power supply to connected circuits.
  • Low Dropout: With a low dropout voltage, it can maintain regulation even when the input voltage is only slightly higher than the output voltage.
  • Thermal Shutdown: Incorporates thermal shutdown protection to prevent damage from excessive heat.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact form factor
  • Low quiescent current

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise in certain applications

Working Principles

The R25100-2COR operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage. It utilizes feedback control to achieve precise regulation and minimize fluctuations.

Detailed Application Field Plans

The R25100-2COR is commonly used in the following applications: - Battery-powered devices - Portable electronics - IoT devices - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

  • R25150-2COR: Similar functionality with higher output current capability
  • R25085-2COR: Lower dropout voltage for ultra-low input voltage applications
  • R25200-2COR: Higher output voltage range for specialized requirements

In conclusion, the R25100-2COR is a reliable electronic component with a wide range of applications, offering precise voltage regulation and efficient power management. Its compact design and advanced features make it a popular choice for various electronic systems.

[Word Count: 498]

तकनीकी समाधानों में R25100-2COR के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

Sure, here are 10 common questions and answers related to the application of R25100-2COR in technical solutions:

  1. What is R25100-2COR?

    • R25100-2COR is a specific type of corrosion-resistant steel alloy commonly used in technical applications.

  2. What are the key properties of R25100-2COR?

    • R25100-2COR exhibits high resistance to corrosion, excellent strength, and good formability, making it suitable for various technical solutions.

  3. In what technical applications is R25100-2COR commonly used?

    • R25100-2COR is often used in marine environments, chemical processing plants, and architectural structures where corrosion resistance is critical.

  4. How does R25100-2COR compare to other corrosion-resistant materials?

    • Compared to other materials, R25100-2COR offers superior corrosion resistance and maintains its properties in harsh environments.

  5. What fabrication methods are suitable for working with R25100-2COR?

    • R25100-2COR can be welded, machined, and formed using standard fabrication techniques, but precautions should be taken to avoid contamination.

  6. What are the limitations of using R25100-2COR in technical solutions?

    • While highly corrosion-resistant, R25100-2COR may not be suitable for extremely high-temperature or highly acidic environments.

  7. How can R25100-2COR be protected from surface discoloration or tarnishing?

    • Proper cleaning, passivation, and regular maintenance can help prevent surface discoloration and maintain the appearance of R25100-2COR.

  8. Are there specific design considerations when using R25100-2COR in technical solutions?

    • Designers should consider factors such as proper drainage, avoiding crevices, and minimizing contact with dissimilar metals to maximize the performance of R25100-2COR.

  9. What are the best practices for handling and storing R25100-2COR materials?

    • R25100-2COR should be stored in a clean, dry environment and handled with care to prevent contamination or damage to the material's surface.

  10. How can the long-term performance of R25100-2COR in technical solutions be ensured?

    • Regular inspections, maintenance, and adherence to recommended operating conditions can help ensure the long-term performance of R25100-2COR in technical applications.