IXYS
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
IXBT12N300
विस्तार से देखें DataSheets

IXBT12N300

Product Overview

Category

The IXBT12N300 belongs to the category of power MOSFETs.

Use

It is used for high-power switching applications in various electronic circuits and systems.

Characteristics

  • High voltage and current handling capability
  • Low on-state resistance
  • Fast switching speed
  • Low gate drive power requirement

Package

The IXBT12N300 is typically available in a TO-220 package.

Essence

This power MOSFET is essential for efficient power management and control in electronic devices and systems.

Packaging/Quantity

The IXBT12N300 is usually packaged individually or in reels, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 300V
  • Continuous Drain Current (ID): 12A
  • On-State Resistance (RDS(on)): 0.35Ω
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 30nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IXBT12N300 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage and current handling capacity
  • Low on-state resistance for minimal power dissipation
  • Fast switching speed for improved efficiency
  • Robust construction for reliability in demanding applications

Advantages

  • Efficient power management
  • Reduced power losses
  • Enhanced system reliability
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful consideration of heat dissipation in high-power applications

Working Principles

The IXBT12N300 operates based on the principles of field-effect transistors, utilizing its gate-source voltage to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IXBT12N300 is commonly used in the following applications: - Switching power supplies - Motor control systems - Inverters and converters - Electronic ballasts - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the IXBT12N300 include: - IRF840 - STP16NF06 - FQP30N06L - IRL540

In conclusion, the IXBT12N300 power MOSFET offers high-performance characteristics suitable for a wide range of high-power electronic applications, providing efficient power management and control capabilities.

[Word Count: 330]

तकनीकी समाधानों में IXBT12N300 के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is the maximum operating temperature of IXBT12N300?

    • The maximum operating temperature of IXBT12N300 is 150°C.

  2. What is the typical output voltage range of IXBT12N300?

    • The typical output voltage range of IXBT12N300 is 0V to 12V.

  3. What is the input voltage range for IXBT12N300?

    • The input voltage range for IXBT12N300 is typically 15V to 40V.

  4. What is the efficiency of IXBT12N300 at full load?

    • The efficiency of IXBT12N300 at full load is typically 90%.

  5. Can IXBT12N300 be used in automotive applications?

    • Yes, IXBT12N300 is suitable for automotive applications.

  6. Does IXBT12N300 have overcurrent protection?

    • Yes, IXBT12N300 is equipped with overcurrent protection.

  7. What is the typical quiescent current of IXBT12N300?

    • The typical quiescent current of IXBT12N300 is 10mA.

  8. Is IXBT12N300 suitable for use in industrial control systems?

    • Yes, IXBT12N300 is suitable for use in industrial control systems.

  9. What is the recommended input capacitor value for IXBT12N300?

    • The recommended input capacitor value for IXBT12N300 is 22µF.

  10. Does IXBT12N300 have thermal shutdown protection?

    • Yes, IXBT12N300 is equipped with thermal shutdown protection.