NXP USA Inc.
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
TJA1055T,518
विस्तार से देखें DataSheets

TJA1055T,518

Product Overview

Category

The TJA1055T,518 belongs to the category of automotive transceivers.

Use

This product is primarily used for communication in automotive applications, specifically in the field of in-vehicle networking.

Characteristics

  • High-speed data transmission
  • Robustness against electromagnetic interference (EMI)
  • Low power consumption
  • Compatibility with various automotive communication protocols

Package

The TJA1055T,518 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to facilitate reliable and efficient communication between different electronic control units (ECUs) within a vehicle.

Packaging/Quantity

The TJA1055T,518 is typically packaged in reels containing a specific quantity of units, depending on the manufacturer's specifications.

Specifications

  • Supply voltage: 4.5V to 5.5V
  • Operating temperature range: -40°C to +125°C
  • Data rate: Up to 1 Mbps
  • Supported communication protocols: CAN (Controller Area Network), LIN (Local Interconnect Network)

Detailed Pin Configuration

The TJA1055T,518 has the following pin configuration:

  1. VCC
  2. GND
  3. TXD
  4. RXD
  5. SLP
  6. STB
  7. WAKE
  8. CANH
  9. CANL

Functional Features

  • Sleep mode functionality for low-power operation
  • Wake-up capability through bus activity detection
  • Error detection and fault confinement mechanisms
  • Transceiver protection features against electrostatic discharge (ESD)

Advantages and Disadvantages

Advantages

  • High-speed data transmission enables real-time communication between ECUs.
  • Robustness against EMI ensures reliable operation in automotive environments.
  • Low power consumption contributes to energy efficiency in vehicles.
  • Compatibility with multiple communication protocols allows for flexible integration.

Disadvantages

  • Limited compatibility with non-automotive applications.
  • Relatively higher cost compared to standard transceivers.

Working Principles

The TJA1055T,518 operates based on the principles of the CAN and LIN communication protocols. It facilitates bidirectional data transfer between ECUs by converting digital signals into physical signals suitable for transmission over the network bus.

Detailed Application Field Plans

The TJA1055T,518 finds extensive application in various automotive systems, including:

  1. Body control modules
  2. Engine control units
  3. Transmission control units
  4. Infotainment systems
  5. Advanced driver-assistance systems (ADAS)
  6. Electric power steering systems
  7. Lighting control modules

Detailed and Complete Alternative Models

  1. TJA1040
  2. TJA1041
  3. TJA1042
  4. TJA1043
  5. TJA1048
  6. TJA1049

These alternative models offer similar functionality and can be considered as substitutes for the TJA1055T,518 depending on specific requirements.

In conclusion, the TJA1055T,518 is a high-performance automotive transceiver designed for reliable communication within vehicles. Its robustness, low power consumption, and compatibility with various protocols make it an ideal choice for automotive applications.

तकनीकी समाधानों में TJA1055T,518 के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

Sure! Here are 10 common questions and answers related to the application of TJA1055T,518 in technical solutions:

  1. Q: What is TJA1055T,518? A: TJA1055T,518 is a high-speed CAN transceiver used for communication between microcontrollers and the CAN bus.

  2. Q: What is the maximum data rate supported by TJA1055T,518? A: TJA1055T,518 supports a maximum data rate of 1 Mbps.

  3. Q: Can TJA1055T,518 be used in automotive applications? A: Yes, TJA1055T,518 is commonly used in automotive applications due to its robustness and reliability.

  4. Q: Does TJA1055T,518 support both CAN 2.0A and CAN 2.0B protocols? A: Yes, TJA1055T,518 supports both CAN 2.0A and CAN 2.0B protocols.

  5. Q: What is the operating voltage range of TJA1055T,518? A: TJA1055T,518 operates within a voltage range of 4.5V to 5.5V.

  6. Q: Can TJA1055T,518 be used in industrial automation systems? A: Yes, TJA1055T,518 can be used in various industrial automation systems that utilize the CAN bus for communication.

  7. Q: Does TJA1055T,518 have built-in protection features? A: Yes, TJA1055T,518 has built-in protection features such as thermal shutdown, short-circuit protection, and overvoltage protection.

  8. Q: What is the typical quiescent current consumption of TJA1055T,518? A: The typical quiescent current consumption of TJA1055T,518 is around 10 µA.

  9. Q: Can TJA1055T,518 be used in low-power applications? A: Yes, TJA1055T,518 is suitable for low-power applications due to its low quiescent current consumption.

  10. Q: Are there any evaluation boards or development kits available for TJA1055T,518? A: Yes, NXP provides evaluation boards and development kits that include TJA1055T,518 for easy prototyping and testing purposes.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.