The 74ACT373SJ belongs to the category of integrated circuits (ICs) and specifically falls under the group of flip-flops.
This IC is commonly used in digital electronics for storing and transferring data. It serves as an octal transparent latch with three-state outputs.
The 74ACT373SJ is available in a standard 20-pin plastic small outline (SO) package.
The essence of the 74ACT373SJ lies in its ability to store and transfer data efficiently, making it an essential component in various digital systems.
The IC is typically packaged in reels or tubes, with each reel containing approximately 2500 units.
The 74ACT373SJ has a total of 20 pins, which are assigned specific functions. The pin configuration is as follows:
The key functional features of the 74ACT373SJ include:
The 74ACT373SJ operates based on the principle of transparent latching. When the clock pulse (CP) is active, the data inputs (D0-D7) are transferred to the corresponding outputs (Q0-Q7). The output enable (OE) pin controls the state of the outputs, allowing them to be either enabled or disabled.
The 74ACT373SJ finds extensive application in various digital systems, including but not limited to:
There are several alternative models available that offer similar functionality to the 74ACT373SJ. Some notable alternatives include:
These alternative models can be considered based on specific requirements and compatibility with existing systems.
In conclusion, the 74ACT373SJ is a versatile integrated circuit used for data storage and transfer in digital systems. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for various applications. However, its limited number of output pins and propagation delay should be taken into account when considering its usage.
Sure! Here are 10 common questions and answers related to the application of 74ACT373SJ in technical solutions:
Q: What is the 74ACT373SJ? A: The 74ACT373SJ is a octal transparent latch with 3-state outputs, commonly used in digital systems for data storage and transfer.
Q: What is the maximum operating voltage for the 74ACT373SJ? A: The maximum operating voltage for the 74ACT373SJ is typically 5.5V.
Q: How many latch inputs does the 74ACT373SJ have? A: The 74ACT373SJ has 8 latch inputs, allowing it to store and transfer 8 bits of data.
Q: Can the 74ACT373SJ be used as a bidirectional buffer? A: No, the 74ACT373SJ is not designed for bidirectional buffering. It is primarily used for unidirectional data storage and transfer.
Q: What is the purpose of the 3-state outputs in the 74ACT373SJ? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other's signals.
Q: What is the typical propagation delay of the 74ACT373SJ? A: The typical propagation delay of the 74ACT373SJ is around 5 nanoseconds.
Q: Can the 74ACT373SJ handle high-speed data transfers? A: Yes, the 74ACT373SJ is designed for high-speed operation and can handle fast data transfers in digital systems.
Q: Is the 74ACT373SJ compatible with TTL logic levels? A: Yes, the 74ACT373SJ is compatible with both TTL and CMOS logic levels, making it versatile for various applications.
Q: Can the 74ACT373SJ be cascaded to increase the number of latch inputs? A: Yes, multiple 74ACT373SJ devices can be cascaded together to increase the number of latch inputs and expand data storage capacity.
Q: What are some common applications of the 74ACT373SJ? A: The 74ACT373SJ is commonly used in microprocessors, memory systems, data buses, and other digital systems where data storage and transfer are required.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.