Encyclopedia Entry: 74ACT533SC
Product Overview
Category
The 74ACT533SC belongs to the category of integrated circuits (ICs) and specifically falls under the family of digital logic devices.
Use
This product is commonly used in electronic circuits for data storage, transfer, and manipulation. It serves as an octal transparent latch with three-state outputs.
Characteristics
- Octal transparent latch
- Three-state outputs
- High-speed operation
- Low power consumption
- Wide operating voltage range
Package
The 74ACT533SC is available in a standard 20-pin small outline integrated circuit (SOIC) package.
Essence
The essence of this product lies in its ability to store and transfer data efficiently within electronic systems, enabling seamless communication between different components.
Packaging/Quantity
The 74ACT533SC is typically packaged in reels or tubes, containing a quantity of 250 units per package.
Specifications
- Supply Voltage Range: 4.5V to 5.5V
- Input Voltage Range: 0V to VCC
- Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Maximum Propagation Delay: 6 ns
- Maximum Quiescent Current: 8 mA
Detailed Pin Configuration
The 74ACT533SC features a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:
- GND (Ground)
- D0 (Data Input 0)
- D1 (Data Input 1)
- D2 (Data Input 2)
- D3 (Data Input 3)
- D4 (Data Input 4)
- D5 (Data Input 5)
- D6 (Data Input 6)
- D7 (Data Input 7)
- LE (Latch Enable)
- OE (Output Enable)
- Q0 (Output 0)
- Q1 (Output 1)
- Q2 (Output 2)
- Q3 (Output 3)
- Q4 (Output 4)
- Q5 (Output 5)
- Q6 (Output 6)
- Q7 (Output 7)
- VCC (Supply Voltage)
Functional Features
The 74ACT533SC offers the following functional features:
- Octal transparent latch with eight data inputs (D0-D7)
- Latch enable (LE) input for controlling data storage
- Output enable (OE) input for enabling/disabling the outputs
- Three-state outputs (Q0-Q7) for high impedance state when disabled
- High-speed operation for efficient data transfer
- Low power consumption for energy efficiency
- Wide operating voltage range for compatibility with various systems
Advantages and Disadvantages
Advantages
- High-speed operation allows for quick data processing
- Low power consumption reduces energy usage
- Three-state outputs enable easy integration with other components
- Wide operating voltage range ensures compatibility with different systems
Disadvantages
- Limited number of data inputs (8) may restrict certain applications requiring more inputs
- Propagation delay of 6 ns may not be suitable for ultra-high-speed applications
Working Principles
The 74ACT533SC operates based on the principles of digital logic. When the latch enable (LE) input is activated, the data inputs (D0-D7) are latched and stored internally. The output enable (OE) input controls whether the stored data is presented at the outputs (Q0-Q7). When the OE input is active, the outputs reflect the stored data. Conversely, when the OE input is inactive, the outputs enter a high impedance state, allowing other components to drive the bus.
Detailed Application Field Plans
The 74ACT533SC finds applications in various electronic systems, including but not limited to:
- Microprocessors and microcontrollers
- Data storage devices
- Communication systems
- Industrial automation
- Automotive electronics
- Consumer electronics
Detailed and Complete Alternative Models
There are several alternative models available that offer similar functionality to the 74ACT533SC. Some notable alternatives include:
- 74HC533: A CMOS version with similar characteristics but operates at a lower voltage range.
- 74LS533: A TTL version with comparable features but operates at slower speeds.
- 74F533: A faster version with reduced propagation delay but consumes more power.
These alternative models provide flexibility in choosing the most suitable option based on specific requirements and constraints.
In conclusion, the 74ACT533SC is an octal transparent latch integrated circuit widely used in digital logic circuits for data storage and transfer. Its high-speed operation, low power consumption, and three-state outputs make it a versatile
तकनीकी समाधानों में 74ACT533SC के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं
Sure! Here are 10 common questions and answers related to the application of 74ACT533SC in technical solutions:
Q: What is the purpose of the 74ACT533SC integrated circuit? A: The 74ACT533SC is an octal transparent latch with 3-state outputs, used for storing and transferring data in digital systems.
Q: How many latch circuits are there in the 74ACT533SC? A: The 74ACT533SC consists of eight individual latch circuits, each capable of storing one bit of data.
Q: What is the maximum operating frequency of the 74ACT533SC? A: The 74ACT533SC can operate at a maximum clock frequency of typically 200 MHz.
Q: Can the 74ACT533SC be used as a buffer for signal amplification? A: No, the primary function of the 74ACT533SC is data storage and transfer, not signal amplification.
Q: How does the 74ACT533SC handle input data when the latch is disabled? A: When the latch is disabled, the 74ACT533SC ignores the input data and holds the previous stored value.
Q: What is the power supply voltage range for the 74ACT533SC? A: The 74ACT533SC operates with a power supply voltage range of typically 4.5V to 5.5V.
Q: Can the 74ACT533SC drive high-current loads directly? A: No, the 74ACT533SC has limited output current capabilities and may require additional buffering to drive high-current loads.
Q: Is the 74ACT533SC compatible with TTL logic levels? A: Yes, the 74ACT533SC is designed to be compatible with both TTL and CMOS logic levels.
Q: Can the 74ACT533SC be cascaded to increase the number of latch circuits? A: Yes, multiple 74ACT533SC ICs can be cascaded together to increase the number of latch circuits in a system.
Q: What are some typical applications of the 74ACT533SC? A: The 74ACT533SC is commonly used in digital systems for data storage, address decoding, bus interfacing, and general-purpose latching applications.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.