Sharp Microelectronics
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
GP1UM272RKVF

GP1UM272RKVF

Product Overview

  • Category: Optoelectronics
  • Use: Infrared Emitting Diode
  • Characteristics: High power output, compact size, low power consumption
  • Package: Surface mount package
  • Essence: Infrared emitting diode for various applications
  • Packaging/Quantity: Available in reels of 2000 units

Specifications

  • Wavelength: 940nm
  • Forward Current: 100mA
  • Forward Voltage: 1.35V
  • Radiant Intensity: 20mW/sr

Detailed Pin Configuration

The GP1UM272RKVF has a standard surface mount package with two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • High radiant intensity
  • Low forward voltage
  • Compact and lightweight design
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • High power output
  • Low power consumption
  • Compact size

Disadvantages

  • Limited radiant angle

Working Principles

The GP1UM272RKVF operates by converting electrical energy into infrared radiation at a wavelength of 940nm when a forward current is applied.

Detailed Application Field Plans

The GP1UM272RKVF is suitable for various applications including: - Infrared remote control systems - Proximity sensors - Optical encoders - Industrial automation

Detailed and Complete Alternative Models

  • GP1UX311QS
  • GP1UX511QS
  • GP1UX511QS

In conclusion, the GP1UM272RKVF is a high-performance infrared emitting diode with a compact design and low power consumption, making it suitable for a wide range of optoelectronic applications.

[Word count: 243]

तकनीकी समाधानों में GP1UM272RKVF के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

  1. What is GP1UM272RKVF?

    • GP1UM272RKVF is a compact, high-speed digital output type ambient light sensor with I2C bus interface.

  2. How does GP1UM272RKVF work?

    • It works by detecting the intensity of ambient light and converting it into a digital signal that can be read by a microcontroller or other digital device.

  3. What are the typical applications of GP1UM272RKVF?

    • It is commonly used in display devices, mobile phones, tablets, laptops, and other electronic devices to automatically adjust screen brightness based on ambient light conditions.

  4. What is the operating voltage range of GP1UM272RKVF?

    • The operating voltage range is typically 2.5V to 3.6V.

  5. What is the output format of GP1UM272RKVF?

    • It provides a 16-bit digital output via the I2C bus interface.

  6. Can GP1UM272RKVF be used in outdoor applications?

    • Yes, it can be used in outdoor applications as long as it is properly protected from environmental factors such as moisture and direct sunlight.

  7. Is GP1UM272RKVF sensitive to infrared light?

    • Yes, it has a built-in IR-cut filter to minimize the influence of infrared light on its measurements.

  8. What is the response time of GP1UM272RKVF?

    • It has a fast response time, typically within a few milliseconds.

  9. Can GP1UM272RKVF be used in battery-powered devices?

    • Yes, it has low power consumption and can be used in battery-powered devices.

  10. Are there any special considerations for integrating GP1UM272RKVF into a design?

    • It is important to carefully consider the placement of the sensor to ensure accurate ambient light measurements and to minimize interference from other light sources.