Texas Instruments
छवि प्रतिनिधित्व हो सकती है।
उत्पाद विवरण के लिए विनिर्देश देखें.
TPS2419D
विस्तार से देखें DataSheets

TPS2419D

Product Overview

Category

The TPS2419D belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This IC is primarily used for power distribution and protection in various electronic systems.

Characteristics

  • The TPS2419D is designed to provide efficient power management solutions.
  • It offers advanced protection features to safeguard electronic devices from overvoltage, overcurrent, and short-circuit conditions.
  • This IC is known for its high reliability and performance.

Package

The TPS2419D is available in a small outline package (SOP) with 16 pins.

Essence

The essence of the TPS2419D lies in its ability to regulate and protect power supply in electronic systems, ensuring their safe and reliable operation.

Packaging/Quantity

The TPS2419D is typically packaged in reels or tubes, with each reel containing 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 18V
  • Output Voltage Range: 0V to 18V
  • Maximum Continuous Current: 3A
  • Operating Temperature Range: -40°C to 85°C
  • Control Interface: SPI (Serial Peripheral Interface)
  • Power Dissipation: 1.5W

Detailed Pin Configuration

The TPS2419D has 16 pins, each serving a specific purpose. Here is the detailed pin configuration:

  1. VCC: Power supply input pin
  2. GND: Ground reference pin
  3. EN: Enable pin for turning the IC on/off
  4. IN: Input voltage pin
  5. OUT: Output voltage pin
  6. FB: Feedback pin for voltage regulation
  7. PG: Power good indicator pin
  8. SS: Soft-start control pin
  9. CS: Current sense pin
  10. SCLK: Serial clock input pin for SPI communication
  11. SDI: Serial data input pin for SPI communication
  12. SDO: Serial data output pin for SPI communication
  13. CSB: Chip select input pin for SPI communication
  14. FLT: Fault indicator pin
  15. REF: Reference voltage pin
  16. NC: No connection pin

Functional Features

  • Overvoltage Protection: The TPS2419D monitors the output voltage and shuts down the power supply if it exceeds a predefined threshold, protecting downstream components.
  • Overcurrent Protection: It detects excessive current flow and limits it to prevent damage to the system.
  • Short-Circuit Protection: In the event of a short circuit, the TPS2419D quickly disconnects the power supply to avoid further damage.
  • Power Good Indicator: The PG pin provides a signal indicating whether the output voltage is within the acceptable range.
  • Soft-Start Control: The SS pin allows for a gradual increase in output voltage during startup, reducing stress on the system.

Advantages and Disadvantages

Advantages

  • Robust protection features ensure the safety of electronic devices.
  • High reliability and performance.
  • Compact package size enables space-saving designs.
  • Wide input voltage range allows for versatile applications.

Disadvantages

  • Limited maximum continuous current may restrict usage in high-power systems.
  • Requires external components for complete functionality.

Working Principles

The TPS2419D operates based on a combination of voltage and current sensing techniques. It continuously monitors the input and output voltages, comparing them to predefined thresholds. If any abnormal conditions are detected, such as overvoltage or overcurrent, the IC takes appropriate action to protect the system. The SPI interface allows for configuration and control of various parameters.

Detailed Application Field Plans

The TPS2419D finds application in a wide range of electronic systems, including but not limited to: - Power supplies for industrial equipment - Battery charging circuits - Automotive electronics - Telecommunications infrastructure - Consumer electronics

Detailed and Complete Alternative Models

  1. TPS2418D: Similar to the TPS2419D, but with a lower maximum continuous current rating of 2A.
  2. TPS2420D: Offers higher maximum continuous current of 4A, suitable for more power-demanding applications.
  3. TPS2417D: Provides similar functionality with a reduced input voltage range of 2.7V to 12V.

These alternative models offer flexibility in selecting the appropriate IC based on specific system requirements.

In conclusion, the TPS2419D is a versatile power management IC that provides efficient power distribution and protection in various electronic systems. With its advanced features and reliable performance, it ensures the safe and reliable operation of electronic devices.

तकनीकी समाधानों में TPS2419D के अनुप्रयोग से संबंधित 10 सामान्य प्रश्नों और उत्तरों की सूची बनाएं

Sure! Here are 10 common questions and answers related to the application of TPS2419D in technical solutions:

  1. Q: What is TPS2419D? A: TPS2419D is a power management integrated circuit (IC) designed for hot swap applications, providing protection against overcurrent and overvoltage conditions.

  2. Q: What are the key features of TPS2419D? A: The key features of TPS2419D include adjustable current limit, adjustable fault timer, reverse current blocking, and thermal shutdown protection.

  3. Q: How can TPS2419D be used in technical solutions? A: TPS2419D can be used in various technical solutions such as server racks, telecom equipment, industrial automation, and battery-powered systems where hot swapping of power sources is required.

  4. Q: What is hot swapping, and why is it important? A: Hot swapping refers to the ability to replace or add components to a system without shutting it down. It is important in critical applications where uninterrupted operation is necessary.

  5. Q: How does TPS2419D protect against overcurrent conditions? A: TPS2419D monitors the current flowing through the load and automatically limits it to a safe level by adjusting the current limit threshold.

  6. Q: Can TPS2419D protect against overvoltage conditions as well? A: Yes, TPS2419D has built-in overvoltage protection that detects excessive voltage levels and shuts off the power path to prevent damage to the load.

  7. Q: Is TPS2419D suitable for both AC and DC power sources? A: Yes, TPS2419D can be used with both AC and DC power sources, making it versatile for different applications.

  8. Q: How can the fault timer of TPS2419D be adjusted? A: The fault timer of TPS2419D can be adjusted using external resistors or capacitors to set the desired delay time before shutting off the power path.

  9. Q: Does TPS2419D provide reverse current blocking? A: Yes, TPS2419D incorporates a reverse current blocking feature that prevents current from flowing back into the power source during hot swapping.

  10. Q: What happens if TPS2419D exceeds its maximum operating temperature? A: If TPS2419D exceeds its maximum operating temperature, it will activate the thermal shutdown protection, disabling the power path until the IC cools down to a safe level.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.